1、制作设计稿：按客户要求绘制石雕手稿，如果可能还需要用电脑制作多角度效果图供客户查阅。
1. Make design draft: Draw stone carving manuscript according to customer's requirement, if possible also need to use computer to make multi-angle effect drawing for customer's reference.
2、选择合适的石材：根据设计图稿、设计要求及制作工艺的要求选择合适的石材材料。需要注意的是，这个过程必须并检查色差、石材结构及其它一些可能影响到后续工作的问题。
2. Choose the right stone material: Choose the right stone material according to the design drawings, design requirements and production process requirements. It should be noted that this process must be checked for chromatic aberration, stone structure and other issues that may affect subsequent work.
3、初加工准备雕刻：把毛石材制作成板材并用龙门锯解成尺寸料。需注意合缝检查。
3. Initial preparation for carving: make the wool stone into plank and use Longmen saw to make the size. Attention should be paid to joint inspection.
4、雕刻放样：根据设计稿制作1：1大样。
4, carving lofting: according to the design draft to make 1:1 sample.
5、开始雕刻：放样完成后，进行石材雏形（大概的轮廓样子）雕刻，然后由工艺美术师精雕细刻。
5. Start carving: After the lofting is completed, the stone prototype (roughly outlined) is carved, and then carefully carved by artists and craftsmen.
6、打磨： 雕刻全部完工后，进行细部处理，并用粗砂布，细砂布进行磨光。
6. Grinding: After all the carving is finished, the carving is treated in detail, and polished with coarse abrasive cloth and fine abrasive cloth.
7、检验验收：在客户验收之前，由公司质监部门进行雕塑质量检查。
7, inspection and acceptance: before the acceptance of customers, the quality supervision department of the company carries out the quality inspection of the sculpture.
8、雕塑安装：根据安装场景、尺寸等做好钢材骨架，并焊接安装。
8, sculpture installation: according to the installation scene, size and so on steel skeleton, and welding installation.
9、审查检验： 浮雕安装完毕后由工艺美术师再进行局部处理，并进行安装验收。
9. Examination and Inspection: After the installation of relief, the artists and craftsmen will deal with it locally, and the installation and acceptance will be carried out.