对铜像的养护前，首先要对铜像进行除尘，一般用抹布或是软毛刷轻轻擦拭即可，如果没有铜锈，只是需要保养一下，那最好的方式就是打蜡抛光。用蜡在五六十度的温度下融化，吹风机吹干，用棉布抛光。对于生了锈的铜像相对要复杂一些。扭王块模具 高铁遮板模具 阶梯护坡模具 拱形护坡模具 卵形槽模具 保定室内设计培训 保定平面设计培训
Before the maintenance of the copper image, the first step is to dust the copper image. Generally, it can be wiped with a cloth or a soft bristle brush. If there is no copper rust, it is only necessary to maintain it, the best way is to wax and polish it. Melt wax at a temperature of 50 or 60 degrees, blow dry with a blower and polish with cotton cloth. The rusted bronze image is relatively complicated.
生锈的铜像要用脱脂棉浸双氧水除锈，一般都能擦拭掉。在锈蚀严重部位则用浸了双氧水的脱脂棉敷上，敷几分钟后再擦，除锈效果非常明显。
Rusty copper image should be degreased cotton soaked with hydrogen peroxide to remove rust, generally can wipe off. In the severely corroded part, it is applied with the absorbent cotton soaked with hydrogen peroxide, and then wiped after several minutes. The rust removal effect is very obvious.
对于长在衣服皱摺，雕刻缝隙，嵌入文字笔画之中的铜锈，还需要用小型的磨光机来处理，细心地将缝里的铜锈清理掉。铜像局部又硬又厚的锈壳，可先用剔刀（黄杨木或PV材料都可以），轻轻将表面的锈壳剔掉，尽量做到不要在铜像表面留下刀纹。
For the copper rust which grows in the clothing crease, carving gap and embedded in the writing and painting, it also needs to be handled by a small grinder, and the copper rust in the seam shall be cleaned carefully. For the hard and thick rust shell of the bronze image, the rust shell on the surface can be removed with a knife (poplar or PV material can be used), and the rust shell on the surface shall be removed gently, so as not to leave the knife pattern on the surface of the bronze image.