| 锻铜浮雕的 三种保养的秘诀 |
| 添加时间：2019/12/23 14:42:34 浏览次数： |
| 锻铜浮雕的 三种保养的秘诀 The secret of three kinds of maintenance of forging copper relief 一、首先是放置问题：将锻铜浮雕-铜雕放置在干燥的房屋，保持干净，温度保持在16-22摄氏度，相对湿度45%-50%。 1、 The first is the placement problem: place the forged copper relief copper sculpture in a dry house, keep it clean, keep the temperature at 16-22 ℃ and the relative humidity at 45% - 50%. 二、其次，锻铜浮雕-铜雕工艺品上的尘埃，要用干净而柔软的布片揩去，而那些需要特别小心的细节（易断、易损），要用柔软的毛刷刷去或用吸尘器吸走或是吹去尘埃。 2、 Secondly, the dust on the forging copper relief - Copper carving crafts should be wiped off with a clean and soft cloth, and those details that need special care (easy to break and wear) should be brushed off with a soft brush or sucked off or blown off with a vacuum cleaner. 三、最后需要注意的是，锻铜浮雕-铜雕工艺品摆放时间过长之后，依据摆放的环境或多或少会出现一些暗哑的现象，这个时候可以用棉丝质的细布轻轻来回擦拭，可达到抛光的效果，从而让表面的保护蜡层重新焕发光彩。 3、 Finally, it should be noted that after a long time of placement, there will be some dull phenomenon more or less according to the placement environment. At this time, you can use a cotton silk cloth to gently wipe back and forth to achieve the polishing effect, so that the protective wax layer on the surface will glow again. |
| 上一页 浮雕的制作工艺流程比较简单，一般包括九步 |
| 下一页 中小型紫铜浮雕工艺品可作为旅游景点的代表性纪念品 |
Copyright © 技术支持：遨游网络